DC 120v 100A 200A 500A Combo Meter Voltage Current KWh Watt Meter 12v 24v 48v 96V Battery Capacity Power Monitoring(100A)

AmmetersCharacteristic1. The bidirectional detection current makes it easy for the user who detects the charge and discharge to detect the bidirectional current without changing the wiring direction.2. Power-off memory function, able to memorize the number of AH and WH before power off after power off, which is convenient for observation and measurement.3, time and AH number clear function, does not affect the next measurement.4. The number of AHs can be filled up without affecting the direct discharge measurement.5, voltage, current, charge capacity AH number, WH number, time, power at the same time display, display information is comprehensive and clear.6, with output off function keys, flexible open or shut off the output.7, with over-voltage, over-current protection.8, when necessary, you can turn off the display, reduce product powerNotice:Default without Temperature measurement function1 measured voltage value 2 Measured current value 3 measured power value 4 Accumulated capacity or energy value 5 Battery Remaining Capacity Progress Bar 6 percentage of battery remaining capacity7 Measured temperature8 output status display9 Total running time10 EmptyInstructions1. AH, WH display switch, click to switch to display WH number, click to switch to display AH number.2. Press OK key to enter the system parameter setting interface, then press OK key to switch the type of setting parameter. The set parameters include BAT, BPC, OPP, OVP, LVP, NCP, OCP, OTP, ADS, TTL, CLR, DTE. , Click to change the parameters, after the parameters are set, press OK to exit the parameter setting interface.Third, function introduction1, "BAT" battery capacity value setting, this parameter is to set the battery measured total capacity.2, "BPC" battery remaining capacity percentage, can be set according to the value of the remaining battery AH4, "OVP" set over-voltage protection value, if the OVP value is set, when the actual measured voltage value is greater than the set value, it will prompt over-voltage, and cut off the relay (self-provisioned).5, "LVP" set over-voltage protection value, if you set the LVP value, when the actual measured voltage value is less than the set value, it will prompt undervoltage, and cut off the relay (self-provisioned).6, "NCP" set over-voltage protection value, if the NCP value is set, when the actual measurement of the charging current value is less than the set value, it will prompt over-current, and cut off the relay (self-provisioned).7, "OCP" set over-voltage protection value, if the OCP value is set, when the actual measurement of discharge current value is less than the set value, it will prompt over-current, and cut off the relay (self-provisioned).8, "OTP" set over-temperature protection value, if the OTP value is set, when the actual measured temperature value is greater than the set value, it will prompt the temperature, and cut off the relay (self-provisioned ,Default withoutTemperature measurement function).9, "ADS" communication address code settings. In multi-machine communication, multi-machine communication is achieved by setting the address code.10, "TTL" instrument default relay output power state, normally open or normally closed.11, "CLR" no-load current clear function, if the actual no-load current is zero

• Ammeters
• DC 120v 100A 200A 500A Combo Meter Voltage current KWh Watt Meter 12v 24v 48v 96V Battery Capacity Power monitoring